Square Peg Round Hole
I’ve made a career out repair cars; it’s a great living full of all kinds of surprises and new adventures. It’s not a career for everyone but for those who have done it for as long as I have we’ve all seen the changes in the way we approach car repair. Our tools and techniques have evolved right alongside of the cars we service. But there is still one fundamental thing that hasn’t changed… a knowledgeable technician/mechanic who understands the complexities of the modern car and how to properly diagnose and repair them. That all starts with the good technical information.
Years ago performing repairs and diagnosing problems was done with the help of those oversize manuals. Some were bound, others not, but for the most part, it was still ink on paper. These manuals spent a lot of time on the edge of a fender and went through a lot of abuse before they were either replaced or taped back together. (Like a lot of mine are.) Every type of information, specifications, and procedures were between the covers of those manuals, and as time passed the volume of information kept growing, as well as the thickness of those manuals. When the PC (personal computer) became the norm so did the way we get our information. Most often it was offered on CD’s or floppy discs when they first came out. That wasn’t that long ago, but, these days everything has gone internet.
In the days of the paper manuals I would take a pencil and scratch notes on the margin of the pages or scribble another line between the words on a page so that I would have a reminder of a change or update for a certain procedure. After a while there were a lot of personal notes in those big heavy books. With the CD’s it wasn’t as easy… however, most of the CD’s were just a transcribed editions of those early books. So, whatever changes that I kept on the margins of those books weren’t part of the CD, which meant I would have to revert back to the old books on occasions.
With the internet services we have today, there is a notation section that I can jot my little cheat sheet information down and store it for later use. I still find some things that just don’t make any sense when I’m looking up some information though, just as it was with the book form there a times when even the great internet information is amiss, slightly off, incorrectly labeled, poorly explained, and… OK, OK, enough of the pleasantries … the truth of the matter is… it’s just flat wrong!
There’s a certain amount of frustration a mechanic goes through when looking up something like a fuse box for instance on a certain car or truck and you get to the “correct page” only to find out that it’s the wrong fuse box. Now you have to go back through, change the year or something and see if you can find a match to the fuse box you’re actually working on. It can be maddening at times trying to dig through the maze of information. Especially when things aren’t where they should be.
It’s like trying to put the preverbal square peg in a round hole sometimes. The harder you try the harder it seems to get. Ya just have to be aware that sometimes that peg just doesn’t fit and it ain’t going to fit. You’re on your own to find that component, labor time, or procedure. It’s just another challenge in the automotive repair business that a lot of folks out there are not aware of. To me, it can be the most frustrating part of the job. I may know what the problem is by looking at the wiring diagram or from a scanner reading but when it comes down to getting to that ailing part and it’s not where it’s supposed be, I’ll guarantee it’s not a good time to ask me, “How’s it going?” Kinder words may have been spoken in the past… but not right about now!
Just the other day I got a 09 Hyundai in that had a bad alternator in it. With the aide of the wiring diagram, meters, and a quick scan I was able to determine the condition of the alternator. The next step was to get the thing out of the car. By the book it was only supposed to take a couple of hours… uh - huh… sure… sure it does. The only way to get it free from its encasement was to get the coolant fans out of the way.
I had to explain to the customer that the book time for the job was wrong before I even started. And, like most people who get an estimate from their mechanic that they aren’t agreeable with they start to call everyone else on their list of repair shops. Of course, everybody else has the same labor rate that I found… but nobody on the list had ever taken an alternator out of that particular car before either. The car was still too new; it was just out of its factory warranty, so I was the first to see this guy’s car outside the dealer. (Lucky me….)
With almost the entire front end of the car dismantled the alternator finally came out. What an ordeal… not only was the job made difficult by the extraction but worse by the customers concerns that I was overcharging. (Pictures helped by the way.) Cooler heads prevailed in the end; it’s all part of my job to explain things as well as to fix things. FYI; Labor guides are called “guides” not labor quotes, just keep that in mind. You can bet I made a note on this one. In more ways than one, it was one of those square peg in the round hole problems, and I’m sure it won’t be the last one either.
